A building template used in a construction project needs to be screened layer by layer. The selection of raw materials, production technology, storage environment, etc. all require strict requirements by the building template manufacturer. Not only that, but also need to pay attention to the temperature. Then, the temperature has an impact on the building template. What are the effects? The following is the answer by the construction template manufacturer.

　　Reasonable temperature control is very important to the production of building templates. The moisture content of the template needs to be controlled within the range of 8%-12% during the hot pressing process. This requires a good temperature control and the moisture content inside the board is controlled to the standard Within range. Appropriate temperature is also required during the gluing process. Higher or lower temperatures will affect the degree of resin fusion. The gluing process is the key to testing the firmness of the template. There is also need to pay attention to the temperature when storing. Especially in summer, the weather is hot and the temperature is high. If the temperature is high, the moisture content inside the board will be reduced, which will cause the board to appear warped, and if it is serious, it will cause the board to crack; when the temperature is low in winter, the board will be cracked. Too high internal moisture content will reduce the overall hardness of the building formwork and affect the normal use of the formwork.